SHARE

How to fix bootloop/hardbrick CherryMobile Flare J1  [PAC]

This tutorial teach you on how to fix bootloop or softbrick, deadboot or hardbrick for your phone Cherrymobile Flare J1. Take note if touch doesn’t work you need to flash Stockrom V2 instead of V4.

Fix bootloop CM Flare j1



Note:
* I’m not responsible for any damages will be held! Do at your own risk!
* Not Rooted /Untouched system on .PAC file
* Follow instructions!
* This will delete your installed user apps!

For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick

Part One: Installing drivers

1. Extract the driver file.
2. Run dpinst.exe . Note that “x86” folder is for 32-bit computer while “amd64” is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and force shut down J1 .
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don’t connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don’t remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!

Part Two: Using Upgrade Download

1. Extract Upgrade Download file
2. Extract your downloaded stock ROM file
3. Run UpgradeDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click “Open” button.
5. Once the PAC file is loaded click play button .
6.Connect your J1 (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!

Additional:
* After the first boot of your phone, your current internal storage is xxxMB . Before doing anything else like rooting, installing or flashing recoveries, Boot to Recovery (stockrecovery-chinese) (volumeup+power) then select the last -to scroll use voldown button . Your phone will start formatting. After that, your internal storage restore to its default size .

Links:

UpgradeDownload 
Firmware v2


(adsbygoogle = window.adsbygoogle || []).push({});

Firmware v4 
Spreadtrum Drivers 

Note: If touch doesn’t work use Firmware V2 instead of V4.

Credits:
Cherry Mobile Flare J1 United™

*Rafael A. Broas
*Dranreb Alcantara

*Mito A260
*Joshua Lopez & Raynard Nerona (v4) – For the files
*Bon Sevilla de Rueda (v2) – For the files


(adsbygoogle = window.adsbygoogle || []).push({});

108 COMMENTS

      • sir gagana ba ito sa V4.0 na MM na STuck kasi ako sa FRP ANy sulotion naman po oh
        ?
        @fb brendon sanchez

        • Yep, pero depende sa version ng J1 mo. Check lower right portion ng J1 battery mo kung anong version nakasulat, at yon ang iflash mo. Yong akin ay v3.0 kaya pala walang "touch" ang v2 or v4 pagkatpos.

  1. TS ok sya pero bakit . hindi na ma touch? hindi naman sira touch j1 ko noong na bootloop siya. ehh ngayon hindi na ma touch

  2. Sino ka po 🙂 ? Rafael A. Broas here :v v2 po Touch talaga ung bug . pang V4 palang po kc toh 🙂

  3. Hello po.. gusto ko po sana itry 'to kaso everytime na icoconnect ko yung phone sa laptop via USB laging USB is not recognized by windows. any solution po na alam niyo? Installed naman na yung driver kaso may lumalabas na "USB not recognized (Device Descriptor Request Failed)" sa device manager.

  4. Hello ok na po yung CM Flare J1, kaso after po maformat, 256MB lang naman ang internal memory niya. How would I fix this? Please reply ASAP!

  5. Guys firmware v2 already added. So those has touch bag in V4 try the Firmware V2. Same procedure.. Don't forget to thank Mr. Rafael Broas for this Firmware.

  6. question lang po, may ways po ba na pwede e downgrade ang OS ng Flare J1 from Lollipop to Kitkat? like changing the system.img with the same chipset model from other phone with kitkat version? thanks.

  7. Hello po ulit, ilan beses ko na po inulit ulit magformat using recovery xxxMB pa din po yung memory.. paano po maayos yun? wala po ba nakakaalam?

    • sken po bkit hndi madetect ng pc,meron nmn akong DPINTS.EXE? pa help naman po sir.. TIA PO

  8. Any idea how to revive my J1 coz both version not working on my end? Maybe there is new version for V4. Please help guys. Thanks

  9. pano po i-off yung j1 k0? nag stock kac siya sa logo after i-hard reset ko e.. pano ma off?

  10. Pano po i- off ang j1 ko? di ko kac ma off ..nag stock siya sa logo after kong mag.hard reset.. pano i off?

  11. A yaw mg format young internal
    Young Chinese na recovery na instruction. Android logo long parati

  12. Aq din po please help, my touch bug xa and ayaw niya gumana kapag nakaconnect sa internet..

  13. paano po ung j1 ko ayaw ma touch ee gagana po ba talaga yung v2 pano po kapag hinde tapon nalang xD v6 po ata ung j1 ko ee :3 salamat po

  14. Idol yung sakin po after ko gawin yung preocedure nag black screen tapos pinabayaan ko lang, V2 ginamit ko ngayon di ko na po maulit yung process para sa V4… what should I do? nabuhay pero yung touch di gumagana…

  15. ginamit ko yung V2 di gumana yug touch tapos nng uulitin ko yung process di na po narerecognize ng computer ko yung J1… pa help naman po…

  16. sa firmware yata to kasi mataas yong memory halos 1 gb
    siguro kaya di nag wo work yong touchscreen kase wla na space yong android

  17. sir bakit ganun yong touchscreen ng flash na ko ng 2 beses yung una v2 tapos yong v4 ganun pa rin yung touchscreen di nag wo work tapos walang sound yung v4 na firmware

    • Wala kcing version yung J1 mo kaya pag flash mo sa file sa taas normal ayaw mag touch yan. pm mo ako bigyan kita ng tamang version yan.

      • sir patulong naman wala po version j1 ko nag try ako ng v2 to pero pag dating sa repartition progress field ano po gagawin ko help naman po

  18. Sir na stock ako dun sa chinese recovery,pag yung last yung pinipili ko may nalabas na logo ng adroid tapos red exclamation mark.May translation po ba kayo nung chinese stock recovery kahit by words lang? salamat.

  19. Pano po e force shut down yung j1 ? Yung sakin po kasi na stuck up lang sa logo tapos pag nilong press ko yung power button mawawala tapos pag binitawan ko na bigla namang babalik . Hanggang logo lang siya ng Flare J1 . Patulong naman sa nakaka alam 🙁 . Ano pwede gawin 🙁 .

  20. 256mb din internal memory ng j1 ko… nagtry ako maghard reset pero yung lumalabas ay yung android na my exclamation mark v04 po ginamit ko

  21. Ako, di ko na ginalaw ug flare j1 ko, kahit gusto ko sanang e root.

  22. Paano po Iforce Shut Down eh nasa Flare J1 Logo po siya.. ayaw mo talaga.. eh built in ang Battery dIba? Paano po namin MasaShutDown?

  23. Sobrang maraming salamat mga sir, lalo na sa taong dahilan kung bat working n cm flare j1 ko….maraming salamat sayo sir…

  24. PLsssss Po Nagmamaka awa ako Gawa Kayo Ng Video ASAP, DI ko po Ma Balik Sa dati CM FLARE J1 ko Plz po

  25. BASAHIN PO NINYO NG MAIGI.. YUNG PROSEDURE.. GOOD PO SA AKIN ANG V04 .. YUNG V02 AYAW MAG GANA ANG TOUCH.. PERO OK NA DIN KASI YUNG V04 GOOD 1000000%

  26. YUNG IBA SANA D MAWALAN NANG PAG ASA. AKO NGA ISANG ARAW KO NATAPOS YUNG SA J1 KO.. NAKAKAPAGOD HEHEHE … TIYAGA LANG MGA KAIBIGAN. ^_^ ANG ALAM KO PAG ROGRAM ANG SIRA ..SA PROGRAM DIN MA SO SOLVE.. ^_^ SALAMAT ADMIN. MORE POWER! ^_^

  27. yung sa akin touch din po prob any solution po di k siya ma touch at kung sa program ang prob pwede ba iuploade updated prog or PAC file

  28. my dpinst.exe na ako d parin madetect device ko. saan nyo po ba dinownlod yong dpinst.exe nyo?? need help

  29. nagwork po sa akin thank u po.. na change ko na ung boot animation ko at sound. na uninstall ko na din ung mga google na d naman kailangan. at ok ok na ung memory ko mabilis ung phone kahit 512 lng ung ram ko.

  30. please help. storage sa phone ay di tama. pano ba to? tried factorry reset pero ayaw pa din. maawa po kayo! 🙁

  31. mga boss, salamat sa rom na ito.. narecover ko phone ko mula sa pagkakabootloop…
    ngunit meron pa po akong isang problema… ung storage nya is 256 mb lang.. dinawa ko naman ung additional instruction ng ilang ulit.. pero ayaw padin bumalik sa dati ung storage nya.

    salamat po sa tutugon!!!!

  32. Na solve ko n ung Problem tungkol sa 256mb internal Storage! Kso sa V4 q lng nasubukan! Lalo Pang lumaki Internal q Naging 2.29gb insted ok 1.95gb! Ganito lng gagawin! Makinig mabuti ok

    Press up and power hanggang sa lumabas ung chinese recovery! tapos punta sa pinaka baba using down volume! pag nsa pinaka baba na press up volume naman! pag lumabas n ung android n naka "Higa" just keep pressing up/down volume and power salit salitan! tapos may lalabas n Boot.. hanggang sa mapunta k sa Wipe/partition And Factory reset! Tapos i Wipe mo n partition at i Factory reset Then Reboot! Tapos W8 lng Loading Tapos Yun Okey n Na restore n J1 Internal Memory mo! Sana Makatulong! TY Godbless!

    • Thank you for the tip! Successfully done!! Had same problem about internal storage, but after following your guide, it is done very well. Thank you!!!

  33. di gumawa sakin both v2 and v4.di na gumagana ung screen ok na sana nabuhay phone ko ung screen na lang di na gumagana my napansin ako sa likod ng phone ko ung lable v3.0 sya nakasulat

  34. na ayos kona ehehehhe v3 pala flare j1 ko kaya pala di gumana sa v2 at v4 ung screen ko.maling verion pala ako nakahanap din ako v3 para sa j1 ko ayun gumagana na ulit.

    • Sir Armando, saan po kayo nakadownload ng V3 para sa flare J1? Please pahelp naman po!

  35. sa mga nag flash ng v2 ( kagaya ko na end result is hindi ma touch yung screen — bale flash nyo lang v4 ).

    then once na flash na yung v4, malaki chance na hindi nyo mapasok ang recovery by pressing volume up + power button combination… try nyo to para mapasok nyo ang recovery.

    + make sure naka on ang unit nyo
    + then enable nyo ang debugging mode
    + open command line and dapat meron kayo adb na naka install
    + issue command like this :: adb.exe reboot recovery

    done… antayin nyo lang mag boot unit nyo sa recovery.

  36. V3 ang nakasulat sa lower right hand ng battery sa likod ng J1 ko kaya naghanap ako ng V3 firmware. Ngayon okay na.thanks po!

  37. akin po walang version sa lower right. Anong ersio gagamitin ko?

    • Puntahan nyo po yong kung kanino nyo nabili yong Flare J1 nyo at magpatulong kayo para malaman kung anong version ng Firmware nyan.
      I hope this helps….

  38. Thanks Guys sa mga nagshare ng experience marami kayo natulungan sana ganto palagi tulungan. Enjoy and thanks for visiting Androidcribs. Merry Xmas and Happy New Year.

  39. sir rafael.
    ask khu lang poh kasi ung unit khu cm flare j1 V2,
    nung mag shutdownd poh xa d na poh xa ma open at d na rin xa nag chacharge d rin poh xa ma detect ng pc.

    panu poh ma fix poh ito?
    TIA.

  40. v2 at v4 no touch pero v3 pla ang sakin kaya
    sir salamat sa inyo dahil d2 na ayos ko ang j1 ko
    tnx tlga mwah mwah

    • Paki explain please.
      Error saan? Paano mo nakukuha yong errors? Mas maigi kung may screen shot sana..

  41. Help naman po poag ka flash ko naka lagay REPARTITION FIELD ano pwde kong gawin ??

  42. Mga Sir help naman po bakit po lagi failed ung pag flaflash ko pag dating sa re-partition failed po pa help po plsss

  43. yung sakin flare j1 lang ang lalabas
    pano ba to ? mag faflash ako ayaw gumana .. 🙁 patulong nman paps

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.