How to Root MyPhone My36 and Install TWRP recovery

My36 Specs:
5.2-inch Full HD IPS display w/ Gorilla Glass 3
1.3GHz Octa-core 64-bit processor
3GB of RAM
16GB internal memory, w/ microSD support up to 64GB
13-megapixel rear camera
5-megapixel front-facing camera
Dual-SIM / Dual-Standby
2900mAh battery
Android Lollipop
Finally we made Rooting Procedure and Flashing TWRP and CWM recovery for MYphone My36. In this tutorial I have 2 method for Rooting. It’s up to you of what you prefer. Just try the first method if not work proceed the 2 method.
Warning! Rooting can void your warranty!. DO it at Your own risk!
Rooting via PC and Flash via SPFT

USB Cable
Download Links:
Mediatek VCOM Drivers:
SP Flash Tool:
My 36 TWRP & Scatter File:
Click Here
My 36 CWM & Scatter File:
Click Here


1. Download all necessary files and Enable USB Debugging mode in your phone..
2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Add legacy

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
 Now Click on Next and select Install this driver software anyway and wait for finishing the process.
    After installation is finished then Restart your computer, That’s it.
3. Extract SPFlash tool and
4. Copy the to your phone.
5. Open flash_tool.exe, click on the Download Tab



6. Click Scatter-loading and browse for the scatter file(included in the My36 TWRP+Scatter file) (MT6753_Android_scatter)
7. Make sure flashing mode is set to “Download Only” and check mark only on the Recovery.



8. Click Download.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image will show once flashing is completed.
11. Important: Disconnect your phone from the computer, press and hold Vol Up + Power.
12. Boot menu will show, select Recovery.
From the custom recovery (TWRP), it is recommended to backup your phone first, before rooting.
To root:
1. Reboot your  phone then press and hold Vol Up + Power On
 the TWRP Recovery , click Install.
2. Select
3. Flash it, no need to wipe cache, you can reboot as it is.
4. Enjoy your rooted  MY36.
Then download Root checker in Playstore to verified.
Download all:
(run exe file to load needed drivers)
2. Vcom drivers: .. (install sa pc)
(extract the file then copy to desktop)4. TWRP



(copy this to your root directory of sdcard(sa labas lang ng sdcard wag sa mga folder ok)


1) Unlock bootloader:
1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking”. Then power off.
1.2) Boot your device to Fastboot mode (hold power button and vol up) choose fastboot mode or boot into bootloader), then connect your phone to PC via USB cable. Open folder fastboot from minimal adb fastboot tool(run as administrator)

Click Run me.bat

fastboot click run me.bat
Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
fastboot oem unlock


2) Install custom Recovery:
2.1) Download from here choose any of these two: TWRP or CWM TWRPClick Here
 copy this recovery.img inside (minimal adb fastboot tool folder)
recovery copy
2.2) Boot in the BOOTLOADER mode. Then execute command “fastboot flash recovery recovery.img”;
fastboot flash recovery
and then “fastboot reboot”.

fasboot reboot


3) Rooting:
3.1) Copy last beta of SuperSU v2.52 to your SD Card (file
Click Here
3.2) Boot in the CWM with “Vol+” and “Power” buttons.
3.3) Install ZIP from external-sd card.
3.4) Reboot and don’t select “fix root”, only “Yes”.
3.5) After boot, start SuperSU and configure it. Root done!
Then download Rootchecker in Playstore to verified!Disclaimer:
Please give proper credits in my blog and Do not reupload, Instead share this link! Thank You!

Wiko Fever


  1. wala na po bang problem using SPF sa Windows 10? or kelangan Window 7 ang gamitin?

    yung kasing previous phone (Agua Rio) ko ayaw maroot using SPF(Win10) pero nung gumamit ako ng Win7 nakapagroot ako.

    • i have mine just this december, im planning of rooting it but hesitant might brick it, im using windows 10 at home,

  2. i have my m36 just last december 2015, and i want to root the unit. but im hesitant that i might brick phone. im using windows 10,

  3. @Dark Matter
    Follow our new tutorial on how to fix harcbricked or deadboot for Myphone My36 here

  4. I have already fixed my phone with the stock rom. Its actually easy. but it took me 4 hours to fix it. worth the experience tho. but I have doubts about the stock roms build ( im referring to the stock ROM provided by Yukito Yamamoto, the files has wiko build version)


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.